4. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Isolate the heating element. Use a desoldering wick and soldering iron to desolder the wires. Refer to the soldering page below. |
|---|---|
| - | [* black] [[Topic:Soldering]] |
| - | [* black] You will need to be careful with these wires since they will power your replacement heating element. |
| - | [* black] Do NOT cut them or yank the by any means other than soldering, this may cause further issues with your hair dryer. |
| + | [* black] Isolate the heating element. Use a desoldering wick and soldering iron to desolder the wires. Refer to [[Topic:Soldering|this soldering page]] for more information on soldering. |
| + | [* icon_caution] You will need to be careful with these wires since they will power your replacement heating element. |
| + | [* icon_caution] Do NOT cut them or yank the by any means other than soldering; this may cause further issues with your hair dryer. |