4. Adımdaki Değişiklikler
Düzenleyen: Eric G Emens —
Düzenleme onaylandı tarafından Eric G Emens
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Isolate the heating element. | |
| [* black] Use a desoldering wick and soldering iron to desolder the wires. Refer to [[Topic:Soldering|this soldering page]] for more information on soldering. | |
| [* icon_caution] You will need to be careful with these wires since they will power your replacement heating element. | |
| - | [* icon_caution] Do NOT cut them or yank the by any means other than soldering; this may cause further issues with your hair dryer. |
| + | [* icon_caution] Do NOT cut them or yank the wires by any means other than soldering; this may cause further issues with your hair dryer. |