4. Adımdaki Değişiklikler
Düzenleyen: Katie Pezaris —
Düzenleme onaylandı tarafından Katie Pezaris
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Isolate the heating element. Use a desoldering wick and soldering iron to desolder the wires. Refer to the soldering page below. | |
| [* black] [[Topic:Soldering]] | |
| + | [* black] You will need to be careful with these wires since they will power your replacement heating element. |
| + | [* black] Do NOT cut them or yank the by any means other than soldering, this may cause further issues with your hair dryer. |