Razor A Wheel Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Marley Miller — 30 Eki 2012

Düzenleme onaylandı tarafından Marley Miller

	[* black] Insert a 3/16" Allen wrench into the screw on one side of the wheel, and hold it securely in place. At the same time, use a second 3/16" Allen wrench to loosen the screw on the other side.
	[* black] Remove the screws. The wheel should now be free and fall out.
+	[* icon_caution] WARNING: During reassembly, do not over-tighten the screws. They should be just firm enough to prevent the wheel from shaking. Over-tightening could result in stripped screws.