Razor A Wheel Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Edwin McGugan — 12 Mar 2019

Düzenleme onaylandı tarafından Taylor Dixon

	[* icon_caution] When replacing a wheel, look for a metal sleeve in the center of the bearing that may be out of line. Forcing a screw through a sleeve that is out of line could ruin the wheel.
	[* red] Remove any obstructions inside the bearing of the new wheel, and move the inner sleeve in the bearing with an Allen key so that the screws can slide into the bearing freely.
	[* black] Put the replacement wheel into place in the scooter frame.
+	[* black] Add threadlocker glue on the bolt (just a little) and tighten it until it won't fall off or lock the wheel.