Bu Adımdaki Değişiklikler
Düzenleyen: Marley Miller —
Düzenleme onaylandı tarafından Marley Miller
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_caution] WARNING: |
|---|---|
| + | [* icon_caution] WARNING: During reassembly, do not over-tighten the screws. They should be just firm enough to prevent the wheel from shaking. Over-tightening could result in stripped screws. |
| [* black] Re-insert both screws. As in Step 2, use a 3/16" Allen wrench to hold one screw in place and use the second Allen wrench to tighten the screw on the other side. |