Bu Adımdaki Değişiklikler
Düzenleyen: Dominik Schnabelrauch —
Düzenleme onaylandı tarafından Dominik Schnabelrauch
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_note] Open the MacBook Pro a little wider than 90 degrees, and place it |
|---|---|
| + | [* icon_note] Open the MacBook Pro a little wider than 90 degrees, and place it with one end on the table, as shown. |
| [* red] Remove the three T9 Torx screws from the upper display bracket. Hold the display with your left hand while doing so. | |
| - | [* icon_caution] Be sure the display and upper case are balanced and will not fall, potentially damaging |
| + | [* icon_caution] Be sure the display and upper case are balanced and will not fall over, potentially damaging other components. |
| [* orange] Remove the three T9 Torx screws from the lower display bracket. Hold the display with your left hand during this procedure. |