Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Tobias Isakeit

Düzenleme onaylandı tarafından Tobias Isakeit

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Slightly open the display towards the bottom using the display cables as a hinge.
-[* black] Use a pair of tweezers to pull off the adhesive from the display and the force touch gasket.
-[* black] Thread it around and behind the display cables to get it off completely.
-[* icon_reminder] Make sure you replace the adhesive ([product|IF308-002|38 mm|new_window=true] / [product|IF308-018|42 mm|new_window=true]) when reassembling the watch.
+[* black] Use a pair of tweezers to peel the adhesive off the display and the force touch gasket.
+[* black] Thread it around and behind the display cables to get the adhesive off completely.
+ [* icon_reminder] Make sure you replace the adhesive ([product|IF308-002|38 mm|new_window=true] / [product|IF308-018|42 mm|new_window=true]) when reassembling the watch.
+[* black] Then press the gasket down to make it re-adhere to the case.
+ [* icon_note] If the force touch gasket itself comes off the case too and it won't stick back down again you probably want to have two adhesives for reassembling the watch—one for underneath the gasket and one for between the gasket and the display.