Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use a pair of tweezers to peel off the tape covering the display cable connectors.
+[* black] Use a pair of [product|IF145-020|tweezers] to peel off the tape covering the display cable connectors.
[* black] Start from the bottom right of the tape and carefully work your way towards the connector in the middle.
[* icon_note] The tape can be stubborn, so take care not to pull too hard and damage the cables underneath. If needed, apply a little heat or some isopropyl alcohol to help soften the adhesive.