| - | [* red] Use a JIS 000 screwdriver to remove the four 3.7 mm screws securing the right Joy Con rail to the frame of the device. |
|---|
| - | [* icon_caution] These screws are torqued down and can be difficult to remove. Make sure you're using a JIS screwdriver—not a Phillips screwdriver—during this procedure. Otherwise, you risk stripping the screws. |
|---|
| + | [* red] Use a JIS 000 screwdriver or an official iFixit PH 000 driver to remove the four 3.7 mm screws securing the right Joy Con rail to the frame of the device. |
|---|
| + | [* icon_note] These screws are torqued down and can be difficult to remove. To prevent them from [guide|13213|stripping], apply firm downward force, work slowly and try a different screwdriver if the screws won't come out. |
|---|