Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Cooper

Düzenleme onaylandı tarafından Cooper


Adım Satırları

-[title] Disconnecting the '-' button
-[* black] Notice that a fragile ribbon cable is limiting access to the analog stick. This cable is locked into place by a grey switch on the same side as the cable is inserted. Take a spudger and carefully flip the switch upwards, then gently remove the '-' button ribbon cable.
+[* black] ***Remove the three Phillips #00 screws on midframe.***
+[* black] Do not attempt to remove the midframe yet. There is a fragile ZL cable that runs from the top of the midframe to the motherboard underneath.