| [* black] Here's some notes about the triple square tool and bolts. |
| [* black] I've tried a number of triple square drivers over the years, mostly with poor results. Good ones are expensive! |
| [* black] Here's a rather inexpensive triple square driver set (around $30): [http://www.amazon.com/8Pc-Triple-Square-4Mm-16Mm-Set/dp/B000I1Q60O|VIMXZN100 from Amazon] |
| [* black] I had a set from SK Tools that was very poor - the drivers were very loose when you put them in the bolt head you were trying to remove. They'd slip and strip the head of the bolt. Not recommended! |
| [* black] Please note that these triple square bolts are extremely tight and difficult to remove. It's not that their just tight, they have lock-tight or something on them that make them hard to remove all together. They don't just "break loose".
|