Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

3. Adımdaki Değişiklikler

Düzenleyen: Justin

Düzenleme onaylandı tarafından Justin

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the left seatback.
[* black] To accomplish this, the seatback needs to be free of the mounting bracket toward the inside of the car (see previous step).
[* black] The seat needs to lean forward then pushed toward the center of the car to release it from the side of the vehicle.
[* black] See the pics to get an idea of the angle needed and what the mounting pin looks like on the side of the vehicle.
[* black] '''A couple important notes about my pictures:'''
[* black] The picture of the seatback leaning forward shows the seat bottom being used as a support - this was for the photo only to give you an idea of the angle. When removing the seatback, the seat bottom needs to be all the way forward.
[* black] The picture of the seat (removed from the vehicle) lets you see inside the hole that engages the mounting pin. There's a piece of plastic trim missing from this photo. My trim broke during a prior removal attempt...

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi