Giant Reign 2 Front Wheel Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Liz Matresse — 23 Kas 2015

Düzenleme onaylandı tarafından Liz Matresse

-	[* black] ~~Loosen the 4 (2 on each side) 22mm hex screws on the front of the axle casing.~~
-	[* ~~icon_note~~] ~~Do not remove~~ the screws ~~all~~ of the ~~way. Take the screws approximately 3/4 of the way out~~ to allow the axle to slide freely ~~when it is removed~~.
+	[title] Hex Screws
+	[* red] Using the 4mm Allen wrench, partially unscrew the four 22mm hex screws on the front of the axle casing to allow the axle to slide freely.