Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: David Albarran-Martinez

Düzenleme onaylandı tarafından David Albarran-Martinez

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the three Phillips 2.8 mm screws at the marked places with a JIS #000 screwdriver.
-[* icon_note] The screw on the back of the ultrasonic sensor is covered by the foam.
+[* red] Remove the three Phillips 2.8mm screws with a JIS #000 screwdriver.
+[* icon_note] The screw on the back of the ultrasonic sensor is covered by foam.