Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: rileyeri

Düzenleme onaylandı tarafından rileyeri

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Using your fingers, press down firmly on the plastic slide and push in the direction of the arrows shown above the word "Open" on the plastic.
+[* yellow] Using your fingers, press down firmly on the plastic slide and push in the direction of the arrows shown above the word "Open" on the plastic.
[* black] Remove the plastic slide from its location and set it aside.
[* icon_note] These plastic slides are not interchangeable, so make sure each goes back to its original location in reassembly.
-[* black] Remove all 4 AA batteries by placing your fingernail at one end of the battery and applying force upwards until the battery is freed from its holder.
-[* black] Set the batteries aside, careful to not get them wet.
-[* black] Insert your fingernail or a prying tool under the notch of the plastic slide that is protecting the watch battery.
-[* black] Apply force in the direction of the arrow shown above the word "Open" on the plastic. The plastic piece covering the watch battery should come loose.
-[* black] Set this plastic covering aside as well.
+[* yellow] Remove all 4 AA batteries by placing your fingernail at one end of the battery and applying force upwards until the battery is freed from its holder.
+[* orange] Insert your fingernail or a prying tool under the notch of the plastic slide that is protecting the watch battery.
+[* black] Set the plastic covering and the watch battery aside.