Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

1. Adımdaki Değişiklikler

Düzenleyen: Teena Carnegie

Düzenleme onaylandı tarafından Teena Carnegie

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove all wires and ribbon cables attached to the motherboard.
[* black] Some Wires have small black tabs on top of them. Meaning one must grab the tab and pull directly upward, gently.
[* black] Some ribbon cables may require the blue opening tool to release the cable's connectors before pulling it out.
[* black] Finally, some cables have a plastic head with small notches on the side. One must use their Use your hand to gently wiggle this cable side to side to remove.
[* black] Finally, some cables have a plastic head with small notches on the side. One must use their Use your hand to gently wiggle this cable side to side to remove.
[* icon_caution] The blue opening tool is recommended to avoid damaging the cables.
[* icon_note] There should be a total of 8 wires/cables that must be removed from the motherboard.