Casio CTK-501 Speaker Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Jimmy Winne — 1 Kas 2012

Düzenleme onaylandı tarafından Jimmy Winne

-	[* icon_note] Plug in the soldering iron and place somewhere safe to avoid burning yourself or causing a fire.
+	[* icon_caution] Plug in the soldering iron and place somewhere safe to avoid burning yourself or causing a fire.
+	[* black] Completely unscrew and remove all four screws in the corners of the speaker.
+	[* black] Pull the speaker out of the keyboard and set on a flat surface to solder safely.
+	[* black] Touch soldering iron to solder over the end of the wires, and when the solder melts, pull the wires away from the speaker.
+	[* black] Remove the speaker and replace with a new one.
+	[* icon_note] Strip the wires if you need more clean metal to solder to the speaker.
+	[* black] Use the soldering iron to melt the solder over the wire to connect them to the speaker.
+	[* black] Completely screw in the screws back into the original positions on the corner of the speaker.