Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] The antenna cable connector and socket are fragile.
-[* black] Use the point of a spudger or fine tweezers to gently pry the antenna cable connector straight up off its socket on the logic board.
+[* black] Use the point of a spudger or fine [product|IF145-020|tweezers] to gently pry the antenna cable connector straight up off its socket on the logic board.
[* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down until it snaps into place.
[* icon_reminder] If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate.