4. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_caution] In this step you will be pushing the logic board free from clips holding it to the frame. ***Push only where directed*** or you may damage the fragile cooling fins. | |
| - | [* black] Place a thumb at each end of the exhaust vent, over the fan screw holes. Press firmly until the logic board unclips. |
| + | [* black] Place a thumb at each end of the exhaust vent, over the fan screw holes. Press firmly in the direction of the ports until the logic board unclips. |
| [* black] Once the clips are freed, slide the logic board out of the case. | |
| [* icon_reminder] When reinstalling the logic board, make sure to hold the thin [guide|115309|LED indicator light cable|stepid=222050|new_window=true] out of the way so it doesn't get damaged. |