3. Adımdaki Değişiklikler
Düzenleyen: Lesly Covarrubias —
Düzenleme onaylandı tarafından Lesly Covarrubias
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Place the camera upside down and remove the screws located at the bottom of the camera using the PH000 Phillips head screwdriver (from iFixit tool kit). You should have five 0.4mm Phillips screws in total after this step. Be careful not to remove the two screws holding the LCD screen together. Screws can be placed in a plastic bag or on the mat. |
|---|---|
| + | [* black] Place the camera upside down and remove the screws located at the bottom of the camera using the PH000 Phillips head screwdriver (from iFixit tool kit). |
| + | [* black] At the end of this step, there will be a total of five 0.4mm Phillips screws. Place screws on a magnetic mat or plastic bag. |
| + | [* black] Leave the two screws holding the LCD screen in place. |