Giant Reign 2 Headset Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Sterling Grande — 30 Kas 2012

Düzenleme onaylandı tarafından Sterling Grande

	[* black] Unscrew and remove the 30mm head screw, located on top of the steam.
-	[* black] Loosen the side screws on ~~either side~~.
-	[* black] Pull off handlebar.
-	[* icon_caution] Hang it gently from the cables. Be careful not to pull on the cables too hard as you may damage the brake/derailleur lines.
+	[* black] Loosen the side screws on both sides.
+	[* black] Pull off the handlebar.
+	[* icon_caution] Hang the handlebar gently from the cables. Be careful not to pull on the cables too hard, as you may damage the brake/derailleur lines.