Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: matthew pennell

Düzenleme onaylandı tarafından matthew pennell

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Begin tightening the second knut on the side with the chain (usually the left side) with a 14mm
+[* black] Begin tightening the second nut on the side with the chain (usually the left side) with a 14mm
[* icon_note] You should visually see the chain tightening and the sliders moving which marks the chain position
[* black] Tighten to where there is about ½ to ¾ inch of play in the chain.
[* icon_note] Notice the mark of the slider on the side you tightened first
[* black] Tighten the opposite side till the slider is in the same position as the first side you tightened