2. Adımdaki Değişiklikler
Düzenleyen: David Hodson —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_note] This step requires working with both hands and may be better accomplished with the logic board sitting in your lap. | |
| - | [* black] Using |
| + | [* black] Using a plastic opening tool (or similar) in one hand, push down one pin holding the heat sink on the logic board. The spring under the pin will provide moderate resistance. |
| [* black] While holding the pin down from the heat sink side of the board, use a pair of pliers in your other hand on the underside of the board to squeeze both barbs against the plastic shaft of the pin. | |
| [* black] With both barbs squeezed together, push the pin through its hole in the logic board. | |
| [* black] Repeat this process for each of the four pins holding the heat sink on the logic board. |