| - | [title] Match the polarity and tape the leads onto the new cell |
|---|
| - | [* icon_caution] ***''Do not use too much tape. This may create a short (and explosion!)''*** |
|---|
| - | [* black] After the polarity has been matched, tape the leads to the new cell. Do this for both sides. ***''To remove the risk of a failed rebuild, start on the + side and cut the tape to fit comfortably.''*** |
|---|
| + | [title] Verify polarity and tape the leads onto the new cell |
|---|
| + | [* icon_caution] ***''ONLY USE ENOUGH TAPE FOR A FIRM HOLD. Using too much may lead to a shorted cell!''*** |
|---|
| + | [* icon_caution] ***''BEFORE INSTALLING LEADS ON THE CELL, TEST THE CELL WITH A MULTIMETER TO CONFIRM THE POLARITY!''*** |
|---|
| + | [* black] After the polarity has been matched, tape the positive lead to the new cell. ***''To remove the risk of a failed rebuild, start on the + side and cut the tape to fit comfortably.''*** |
|---|