Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Javen

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the 1.9 mm Phillips screw that secures the battery power connector.
[* icon_caution] Take extreme care when you insert the battery blocker. Insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
- [* black] To disconnect the battery, slide one prong of a Battery Blocker under the battery power connector to ensure the power circuit is interrupted.
+ [* black] To disconnect the battery, slide one prong of a Battery Blocker or a Opening Pick under the battery power connector to ensure the power circuit is interrupted.