Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Dominik Schnabelrauch

Düzenleme onaylandı tarafından Dominik Schnabelrauch


Adım Satırları

-[* black] Insert wisdom here.
+[* icon_caution] The removal procedure of the home button cover is a bit of a fumbling. Avoid damaging the home button flex cable.
+[* black] Use a pair of tweezers and start to lift the home button cover on its left end.
+[* black] Remove the home button cover by carefully pulling it towards the display flex cable.
+[* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it.
+ [* black] Scrape off as much of the old adhesive residue as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
+ [* black] Secure the bracket with hot-melt glue, superglue, or [product|IF317-072|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.