Ana içeriğe geç

16. Adımdaki Değişiklikler

Düzenleyen: Tobias Isakeit

Düzenleme onaylandı tarafından Tobias Isakeit

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the display.
- [* icon_reminder] In case you want to replace the iPads display, note that the fingerprint scanner in the home button is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must transfer your original home button to the new display assembly.
- [* black] To remove the fingerprint scanner move over to the fingerprint guide and [guide|119411|continue with this step|stepid=231331].
- [* icon_reminder] Before installing a new display remove any remaining adhesive from the iPad, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
+ [* icon_note] Keep in mind when replacing the display that you have to transfer the home button to the new display. The fingerprint scanner in the home button is paired to the iPad's logic board.
+ [* black] To do so follow the home button guide and [guide|119411|continuing with this step|stepid=231331].
+[* icon_reminder] Before installing a new display remove any remaining adhesive from the iPad, and clean the glued areas with isopropyl alcohol and a lint-free cloth.