Ana içeriğe geç

16. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the display.
- [* icon_note] Keep in mind when replacing the display that you have to transfer the home button to the new display. The fingerprint scanner in the home button is paired to the iPad's logic board.
- [* black] To do so follow the home button guide and [guide|119411|continue with this step|stepid=231331].
-[* icon_reminder] Before installing a new display remove any remaining adhesive from the iPad, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
+[* black] Remove the display assembly.
+ [* icon_reminder] During reassembly, before installing a display, remove any remaining adhesive from the iPad, and clean the glued areas with high concentration isopropyl alcohol (90% or greater) and a lint-free cloth. This helps prep the iPad for fresh adhesive and ensures that it will bond properly.
+ [* icon_reminder] If you plan to reinstall your existing display, remove any remaining adhesive from the back and clean the adhered areas with isopropyl alcohol as well.
+ [* icon_reminder] Test your iPad's functions and install [product|IF323-028|pre-cut adhesive strips|new_window=true] to the back of the display before sealing it up.