Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Dominik Schnabelrauch —

Düzenleme onaylandı tarafından Dominik Schnabelrauch

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat end of a spudger between the motherboard and its shield where the front facing camera is located.
-[* black] Use the spudger and start to pry up the motherboard cover.
- [* icon_note] Additionally to the screws and the adhesive, the cover is slightly pressed to the motherboard. It is likely to bend during the removal process and you might need some force to remove it. However during reassembly it can be bend back in its original shape and will snap back in its position thanks to the screws.
-[* black] Pry up the motherboard cover until you can get a good grip and remove it.
+[* black] Use the spudger and start to pry up the EMI shield.
+ [* icon_note] Additionally to the screws and the adhesive, the shield is slightly pressed to the logicboard. It is likely to bend during the removal process and you might need some force to remove it. However during reassembly it can be bend back in its original shape and will snap back in its position when screwed in.
+[* black] Pry up the EMI shield until you can get a good grip and remove it.