Eşyalarını Tamir Et Topluluk Mağaza

Bu Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen —

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Place the iPad flat down again with the headphone jack facing towards you.
-[* black] Use a plastic card and start to slide it under the left corner of the battery.
-[* black] Start to pry up the battery with the plastic card and cut the adhesive with it.
-[* black] Slide the plastic card down to the bottom of the iPad and cut all the adhesive beneath the battery block.
+[* black] Remove the iOpener so the iPad lays flat, and rotate it so the headphone jack faces towards you.
+[* black] Insert a plastic card underneath the battery cell, starting near the outer corner.
+[* black] Wiggle the card from side to side and push it underneath the battery to separate the adhesive underneath.
+[* black] Slide the plastic card down toward the bottom edge of the iPad and cut all the adhesive beneath the battery cell.