Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Wedge an iPod opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
-[* black] Slide the iPod opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
+[* black] Wedge a PSP opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
+[* black] Slide the PSP opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* icon_caution] The front panel should now be free from the metal frame. However, it is still connected to the frame, so don't remove it completely.