Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Wedge a PSP opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
-[* black] Slide the PSP opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
+[* black] Wedge a plastic opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
+[* black] Slide the plastic opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* icon_caution] The front panel should now be free from the metal frame. However, it is still connected to the frame, so don't remove it completely.