Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Be very careful when performing this procedure! If you put too much pressure on the display, you risk cracking it.
-[* black] Wedge a PSP opening tool between the plastic front panel and display. Be very careful that you wedge it in the same location shown in the first picture.
-[* black] Slide the PSP opening tool across the length of the display. This should loosen the glue binding the display to the plastic front panel.
+[* black] Wedge a plastic opening tool between the plastic front panel and display. Be very careful that you wedge it in the same location shown in the first picture.
+[* black] Slide the plastic opening tool across the length of the display. This should loosen the glue binding the display to the plastic front panel.
[* black] Rotate the display 180 degrees and free the bottom side of the display in the same manner.