Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor


Adım Satırları

[* black] Disconnect the inverter cable by pulling its connector away from the socket on the inverter board.
[* icon_caution] The inverter board is a very thin and delicate circuit board that is easily broken. Use caution.
[* icon_note] This connector tends to stick in its socket. It is helpful to push the connector with the tip of a spudger through the two small holes in the top of the socket while pulling the connector away from the socket.
[* icon_caution] Make sure to grasp the inverter cabling by the black tape and not the individual wires. Pulling the wires themselves will surely damage the inverter cable.