Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] RemoveCarefully place a suction cup halfway up the iOpener from the iPad.
[*
heated side.
[*
black] Place a suctionBe sure the cup is completely flat on the bottom right of the front panel glass, just above the lower bezel and near the right edge of the devicescreen to get a tight seal.
[* black] WithWhile holding the iPad down with one hand on the devicehand, pull up on the suction cup enough to open a small gap betweenslightly separate the front panel glass andfrom from the rear panelcase.
[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you may risk cracking the glass
.
[* black] RemoveCarefully place a suction cup halfway up the iOpener from the iPad.
[*
heated side.
[*
black] Place a suctionBe sure the cup is completely flat on the bottom right of the front panel glass, just above the lower bezel and near the right edge of the devicescreen to get a tight seal.
[* black] WithWhile holding the iPad down with one hand on the devicehand, pull up on the suction cup enough to open a small gap betweenslightly separate the front panel glass andfrom from the rear panelcase.
[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you may risk cracking the glass
.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Önceki resim yok

Eklendi