Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Clay Eickemeyer

Düzenleme onaylandı tarafından Clay Eickemeyer

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Pry the metal cover up from the bottom of the screen with the iFixit Opening Tool to reveal the corners of the white adhesive strip.
[* black] Pull the metal cover off the device until it's completely free.
[* icon_reminder] Clean off the old adhesive and straighten the metal cover when reassembling.
[* icon_reminder] Use a new adhesive when reassembling.
[* icon_caution] Avoid bending the metal cover to prevent damage to the device.
-[* orange] If you’re really struggling, you could pry it from the other side, but it will damage the piece and screen.
+[* icon_note] If you’re really struggling, you may pry from the opposite side, but be careful not to damage the screen or metal cover.