Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the tape that covers the connector.
-[* black] Here on the picture you can see the connector with its two holders (red squares) unlocked. They hold the cable in the connector and they are supposed to be completely pushed onto it.
-[* black] Try to push the cable into the connector the most you can to be sure it is correctly plugged.
-[* black] Push the holders (red squares) completely into the connector.
-[* black] I suggest to put a better tape on the connector to ensure it never unlock itself again.
+[title] Reconnect the keyboard
+[* black] Remove the tape covering the connector. ***Note:*** Tape should be added to the connector to keep it secure.
+[* red] Here on the picture you can see the connector with its two holders unlocked. These hold the connector in and should be completely pushed in.
+[* orange] Push the connector in. Do this until it is fully connected again.
+[* yellow] Lock the tabs that retain the keyboard connector back in place.

Resim 1

Eski Sürüm

Yeni Sürüm