Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Reconnect the keyboard
-[* black] Remove the tape covering the connector. ***Note:*** Tape should be added to the connector to keep it secure.
-[* red] Here on the picture you can see the connector with its two holders unlocked. These hold the connector in and should be completely pushed in.
-[* orange] Push the connector in. Do this until it is fully connected again.
-[* yellow] Lock the tabs that retain the keyboard connector back in place.
+[* black] Remove the tape covering the connector. ***Note:*** New tape should be added once reseated.
+[* red] Here on the picture you can see the connector in the unlocked position. These hold the connector in and should be completely pushed in.
+[* orange] Push the connector in. Do this until it is secure.
+[* yellow] Lock the tabs that retain the keyboard connector in place.