Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the tape that cover the connector.
-[* black] Here on the picture you can see the connector with his two holders (red squares) unlocked. They hold the wire in the connector and they are supposed to be completely pushed onto it.
-[* black] Try to push the wire into the connector the most you can to be sure it is correctly plugged.
+[* black] Remove the tape that covers the connector.
+[* black] Here on the picture you can see the connector with its two holders (red squares) unlocked. They hold the cable in the connector and they are supposed to be completely pushed onto it.
+[* black] Try to push the cable into the connector the most you can to be sure it is correctly plugged.
[* black] Push the holders (red squares) completely into the connector.
[* black] I suggest to put a better tape on the connector to ensure it never unlock itself again.