Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] Read the next three steps first before attempting the procedure.
[* icon_note] As you work, try not to accidentally power on the phone. If you do, turn the phone off before resuming disassembly.
[* black] Place a suction cup near the bottom edge of the display.
[* black] Pull on the suction cup with strong steady force.
[* black] Press the edge of an opening tool straight into the frame seam near the suction cup until it separates the edge wedges between the plastic frame fromand the back casecover's lip.
[* black] Press the edge of an opening tool straight into the frame seam near the suction cup until it separates the edge wedges between the plastic frame fromand the back casecover's lip.
[* icon_note] Due to tight tolerances, this will take substantial force. Using a new opening tool with an unmarred edge will help with this step.