Ana içeriğe geç

17. Adımdaki Değişiklikler

Düzenleyen: Bobby Hutter

Düzenlenme reddedildi tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] The next logical step was to remove the iMac's logic board.
- [* icon_note] We know, we're terrible.
-[* black] We flip the board over and get our first glimpse of the goodies side, which reveals, well, a lot of goodies.
+[* black] To remove the logic board use an 8H pentalobe bit. Be sure to remove the 4 screws in the corners of the center plastic black air vent (this has to be done as it is mounted to the logic board's heat sink).
+[* black] The two screws on the right are accessed through two cut-aways in the lobo's silicon board, essentially beneath the logic board.

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Önceki resim yok

Eklendi