Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen


Adım Satırları

[* black] Use a pair of tweezers to pull the flex cable of the finger print sensor out of the ZIF connector.
[* black] Gently peel the flex cable off the home button cover and fold it a little bit upwards.
+ [* icon_caution] If needed, apply a little heat from an iOpener, hair dryer, or heat gun to soften the adhesive under the flex cable and make it easier to remove safely. The cable is very fragile. If it gets damaged, or if the home button has to be replaced, Touch ID will no longer function.