Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] The removal procedure of the home button cover is a bit of a fumbling. Avoid damaging the home button flex cable.
-[* black] Use a pair of tweezers and start to lift the home button cover on its left end.
-[* black] Remove the home button cover by carefully pulling it towards the display flex cable.
+[* black] Lift the home button bracket starting from the left side.
+[* black] Carefully pull it upwards toward the display, making sure not to damage the home button cable.
[* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it.
[* black] Scrape off as much of the old adhesive residue as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
[* black] Secure the bracket with hot-melt glue, superglue, or [product|IF317-072|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.