Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Ted Reinders

Düzenleme onaylandı tarafından Ted Reinders

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the face-plate from the light switch by unscrewing the two 11.0mm flat-head7.9mm #6 oval head slotted screws until the plate comes away freely.
[* black] Remove the face-plate from the light switch by unscrewing the two 11.0mm flat-head7.9mm #6 oval head slotted screws until the plate comes away freely.
[* icon_note] Optional: Touch the voltage detector to the screws holding the wires to the sides of the light switch to test for voltage.
[* black] Flip light switch on and off to ensure no electricity is flowing through the switch.
[* icon_caution] Even though power is not flowing, be careful touching bare wire and test accordingly with the voltage detector.