5. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Use a T5 Torx driver to remove the 13 screws securing the trackpad assembly: | |
| [* red] Nine 5.8 mm screws | |
| [* orange] Four 4.9 mm screws | |
| [* icon_reminder] These screws look very similar, so don't mix them up. | |
| [* icon_reminder] These screws can loosen over time due to the clicking action on the Force Touch trackpad. Adding a little blue threadlocker as you install them can help keep them secure. | |
| + | [* icon_reminder] Install the screws loosely and check the trackpad alignment before tightening them down. |