Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jacob MacFarland

Düzenleme onaylandı tarafından Jacob MacFarland

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Orient the drill to where the back is facing up.
-[* black] Using a Phillips #1 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.
+[* black] Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.
[* black] Remove the back piece of the drill (need picture).