12. Adımdaki Değişiklikler
Düzenleyen: Robert Shuler —
Düzenleme onaylandı tarafından Robert Shuler
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the two screws on either side of the power connector located on the top back of the ring camera enclosure using the PH2 tool. | |
| - | [* black] Then using the Spudger Tool, pop of the rubber covers on either side of the power connector cover in the back, and pry off the power connector cover. This will reveal two screws that hold the external power interface to ring camera enclosure. |
| + | [* black] Then using the Spudger Tool, pop of the rubber covers on either side of the power connector cover in the back, and pry off the power connector cover. This will reveal two PH00 screws that hold the external power interface to ring camera enclosure. |
| [* black] Remove the two PH00 screws on either side of the external power connector. Then gently using the Spudger Tool pry the external power connector from the ring camera enclosure. |