13. Adımdaki Değişiklikler
Düzenleyen: Robert Shuler —
Düzenleme onaylandı tarafından Robert Shuler
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Use the Opening Pick to remove the face from around the ring camera. Insert the Opening Pick between the camera face and ring camera body, and work the Opening Pick around the edges to release the retention clips of the camera faceplate. The Spudger Tool can also be used to pry off the camera faceplate. |
|---|---|
| + | [* black] Use the PH00 tool to remove the four PH00 screws located around the camera. Once the four PH00 screws have been removed. Use the Spudger Tool to push the camera loose from the ring camera body. Then remove the camera body from the ring camera housing. This will remove the internal metal assembly that hold the camera, and PCBs. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi