Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Taha Ziad —

Düzenleme onaylandı tarafından Taha Ziad

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove two 2.5mm Phillips head screws with the J00 bit located on the small circuit board in view.
-[* black] New line.Use jimmy to remove board after screws have been removed. Be careful not to crease or damage the ribbon cable.
+[* black] Remove two 2.5mm Japanese Industrial Standard (J) screws with the J00 bit located on the small circuit board in view.
+[* black] Use jimmy to remove board after screws have been removed. Be careful not to crease or damage the ribbon cable.